Brother HL7050 User Manual download pdf (Page 59)

5 - 6 CONFIGURING INTERNET PRINTING FOR WINDOWS

YL4US_FAX2800MFC4800-FM5.5

Brother Internet Print

Using TELNET to Configure the Print Server

When you get the Local> prompt after connecting to the

console, enter the command:

SET POP3 ADDRESS address

where ipaddress is the address of your POP3 server (consult

with your network administrator if you do not know this address).

Enter the command:

SET POP3 NAME mailboxname

SET POP3 PASSWORD emailpassword

where mailboxname is the name of the remote print server

mailbox and emailpassword is the password associated with

this mailbox. Usually the mailbox name is the same as the first

part of the E-mail address that you defined previously (for

example, usually if the E-mail address is emailp[email protected],

then the mailbox name is emailprinter).

The print server is set by default to poll the POP3 server every 30

seconds. If you wish to change this value, enter the command:

SET POP3 POLLING rate

where rate is the polling rate in seconds.

Type EXIT to exit the console and save the changes. You have

now completed configuring the print server.

Skip this section if you used BRAdmin or a Web Browser to

configure the remote print server.

As an alternative to BRAdmin, you can use the print server

remote console to configure the print server. The console can

be accessed via TELNET. When you access the print server

using these utilities, you will be asked for a password. The

default password is access.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 163 164

No comments

Brother HL7050 User Manual Page 59