Brother MFC 8840D User Manual download pdf (Page 114)

TCP/IP CONFIGURATION 11 - 3

The BRAdmin Professional utility can use the IPX/SPX or TCP/IP

protocols to communicate with the Brother Print/Fax server.

If you wish to use the TCP/IP protocol to manage the Print/Fax server

make sure that the Print/Fax server has a valid IP address. If you are

not using DHCP, BOOTP or RARP, you will want to change the IP

address.There are two ways to change the IP address using the

BRAdmin Professional utility:

■

Use the IPX/SPX protocol.

■

Use the TCP/IP protocol and let BRAdmin Professional utility find

the Brother Print/Fax server as an unconfigured device.

Using BRAdmin Professional utility and the IPX/

SPX Protocol to set the IP address

If your PC is using the Novell Netware Client software and is using

the IPX/SPX protocol, do the following:

Select

IPX/SPX filter

in the left frame of the main window.

Check the Print/Fax server name (the default node name is

BRN_xxxxxx

, where

xxxxxx

is the last six digits of the

Ethernet address (MAC address)).

If you cannot find your server name, select the

Device

menu and

choose

Search Active Devices

(you can also press the F4 key) and

try again.

Select the Print/Fax server that you wish to configure and

double click it. You will be asked for a password. The default

password is

access

Select the

TCP/IP

tab and set the

IP address

Subnet mask

and

Gateway

as needed.

You can find the node name and MAC address by printing

out the machine configuration page. For information on how

to print the configuration page on your Print/Fax server, see

Resetting the Print/Fax Sever back to factory settings (Test

Switch)

on page 13-4.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 175 176

Comments to this Manuals

No comments

Brother MFC 8840D User Manual Page 114

Comments to this Manuals

Related products and manuals for Printers Brother MFC 8840D