Brother MFC 8840D User Manual download pdf (Page 91)

10 - 2 FRONT PANEL SETUP MENU

Setup TCP/IP

This menu has nine sections:

Boot Method

IP Address

Subnet

Mask

Gateway

Host Name

WINS Config

WINS Server

DNS

Server

and

APIPA

BOOT Method

(For MFC) Press

(For DCP) Press

Press or to select

Auto

Static

RARP

BOOTP

DHCP

Press

Set

Press

Stop/Exit

Static mode

In this mode the DCP/MFC IP address must be manually assigned.

Once entered the IP address is locked to the assigned address.

Auto mode

In this mode, the machine will scan the network for a DHCP server,

if it can find one, and if the DHCP server is configured to allocate an

IP address to the machine, then the IP address supplied by the

DHCP server will used. If no DHCP server is available, then the

machine will scan for a BOOTP server. If a BOOTP server is

available, and it is configured correctly, the machine will take its IP

address from the BOOTP server. After it is initially powered ON, it

may take a few minutes for the machine to scan the network for a

server.

The machine supports “POWER SAVE mode” and you are

using the AUTO Boot mode, POWER SAVE must be set to

OFF.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 175 176

Comments to this Manuals

No comments

Brother MFC 8840D User Manual Page 91

Comments to this Manuals

Related products and manuals for Printers Brother MFC 8840D