Brother COMPACT OVERLOCK MACHINE Instruction Manual download pdf (Page 28)

Threading the

upperlooper

• Run the thread in the sequence illustrated,

following the green color and the numbers next

to each threading point.

1 Open the front cover by sliding to the right

and guiding the top toward you.

2 Pull the thread off the spool and directly

up through the thread guide on the thread

tree from back to front.

3 Pull the thread about an extra 15cm (6

inches) through the front of the thread

tree.

4 Pass the thread through the proper thread

guide.

5 Slide and hold the thread tension release

button to the right, then pass the thread

through the tension disc which is in

the channel next to the green tension

adjustment dial. Release the button.

6 Guide the thread down the channel and

pass the thread through the threading

points next to the green color marks

following the numerical order in the

accompanying illustration.

为上弯针穿线

• 按如图所示顺序走线，遵照每个穿线点旁的绿色

标记和编号。

1 将前盖滑到右侧并且朝自身方向拉将其打

开。

2 将线从线筒上拉出，然后直接从后至前穿

过线架上的导线槽。

3 将线从线架前端额外拉出 15 厘米（6 英

寸）。

4 将线穿过正确的导线槽。

5 滑动线张力释放按钮并将其保持在右侧，

然后将线从位于绿色张力调节旋钮旁边通

道中的张力盘穿出。松开按钮。

6 顺着通道将线导入并按照附带插图的编号

顺序中绿色标记旁的穿线点穿线。

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 71 72

No comments

Brother COMPACT OVERLOCK MACHINE Instruction Manual Page 28