Brother COMPACT OVERLOCK MACHINE Instruction Manual download pdf (Page 63)

Pin tuck stitching with

blind stitch presser foot

The Pin tuck stitch uses a rolled edge to add shape

and decoration to any sewing project. Fold the fabric

on a line where the pin tuck is to be located and guide

the fold through the serger. Contrasting thread in the

upper looper adds an accent to your project.

Use the blind stitch presser foot to make narrow

overlock stitches to produce seams in the form of

tucks at equal distances from each other.

For thin fabrics, it’s a good idea to choose a ﬁne

thread which will run smoothly.

a Replace the presser foot with a blind stitch presser

foot (multipurpose presser foot). (Refer to page

50.)

b Set up the machine for narrow overlock stitching.

(Refer to pages 45–48.)

c Draw equally spaced lines on the fabric with a

fabric pencil as guides for pin tuck placement.

Fold the fabric along one of the lines and press

in place lightly with an iron.

d Turn the handwheel counterclockwise to set the

needle at its highest position.

e Lift the presser foot lever and insert the fabric with

the folded edge in such a way that the needle

pierces just the folded edge.

f Lower the presser foot lever, adjust the fabric

guide toward the folded edge.

g Align the blind stitch presser foot guide with the

line on the right side of the stitch ﬁnger.

By turning the screw forward (toward you) the

stitch guide will go to the right. By turning the

screw backward (away from you) the stitch guide

will go to the left.

h Align the fold with the guide and insert the fabric

up to the needle position.

i Guide the fold in the fabric to sew half way between

the needle and the upper knife.

j Continue sewing until all marked lines have been

sewn.

• Correct minor contractions by hand.

Test sew on a scrap of the fabric to adjust the fabric

采用暗缝针迹压脚的

双螺纹针迹

双螺纹针迹采用卷边为缝制衣物增添外形和装饰。

沿双螺纹针迹所在的线上折叠布料，并将折缝导入锁

边器。上弯针的对比缝线可以增添衣物的韵味。

采用暗缝针迹压脚缝制窄包缝针迹可形成彼此间距

离相同的螺纹缝边。

对于薄布料，最好选择易于走线的细线。

a 将压脚更换为暗缝针迹压脚（多功能压脚）。

（参见第 50 页。）

b 将缝纫机设置为缝制窄包缝针迹。（参见第 45-49

页。）

c 用铅笔在布料上画等距线作为双螺纹针迹的辅助

线。沿其中一条线折叠布料并用熨斗轻轻按压使

之贴服。

d 逆时针转动手轮，使针处于最高位置。

e 抬起压脚抬杆并放入布料，让折叠边恰好处于针

可以穿透折叠边的位置。

f 放低压脚抬杆，朝折叠边方向调整布料导杆。

g 将暗缝针迹压脚布料导杆对准针迹指针的右侧。

向前旋转螺丝（朝向自身方向），针迹导线杆移

动到右侧。向后旋转螺丝（远离自身方向），针

迹导线杆移动到左侧。

h 将折叠布边对准导杆并将布料正面朝上插入针所

在的位置。

i 将布料的折叠边放在针落下距上切刀之间一半的

位置缝制。

j 继续缝制直到缝制完所有标记的线。

• 用手将轻微收缩的部分抚平。

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 71 72

Comments to this Manuals

No comments

Brother COMPACT OVERLOCK MACHINE Instruction Manual Page 63

Comments to this Manuals

Related products and manuals for Sewing machines Brother COMPACT OVERLOCK MACHINE