Brother S-7200C Service Manual download pdf (Page 13)

S-7200A

4. FUNCTION SETTINGS

Becomes higher Becomes lower

Becomes lower Becomes higher

4-5. Function List

Function No. 0−15

No. Initial value Setting range Setting details

0 0 (degrees)

-10–20

(degrees)

Needle up stop position setting

1 0 (degrees)

-10–10

(degrees)

Needle down stop position setting

2 0

0–1

Depressing forward when depressed backward (thread trimming)

0: Disabled (depressing forward is enabled after returning to neutral position)

1: Enabled

3 1

0–1

Power supply voltage drop check (reset detection) function

0: Not used

1: Used; "Err 6" is displayed when a voltage drop occurs

4 0

0–1

Buzzer (electronic sound) for panel operation

0: Used

1: Not used

5 0

–

(Do not change this setting.)

6 0

0–1

Needle penetration up operation

0: Used

1: Not used

7 0

0–1

Backtack sewing speed

0: Limited by sewing speed control key

1: Not limited by sewing speed control key

9 0

0–1

End backtack sewing speed

0: Separate setting from start backtack sewing speed is possible

1: Setting for start backtack sewing is used

(NOTE 1)

0–4

Option actuator operation setting

0: Half stitch correction sewing

1: Single stitch correction sewing

2: Single reverse stitch correction sewing (reverse feed)

3: Thread trimming

4: Single end backtack cycle cancel

12 0

0–1

Presser foot status when treadle is returned to neutral after thread trimming

0: Presser foot drops (See NOTE 2)

1: Presser foot does not drop

13 0

0–1

Presser foot status after treadle stops at neutral

0: Presser foot does not lift

1: Presser foot lifts

14 0

0–1

Actuator function

0: Reverse stitch switch during operation, correction sewing switch when

stopped

1: Thread trimming switch

15 0

0–1

Slow stop control when treadle is returned to neutral

0: Slow stop control without step operation

1: Above control is not used

(NOTE 1) If function No. 69 is set to "3", operation is enabled.

(NOTE 2) Presser foot will not drop if DIP switch 1 is set to OFF.

2244M

2243M

1 ... 12 13 14 ... 67

Comments to this Manuals

No comments

Brother S-7200C Service Manual Page 13

Comments to this Manuals

Related products and manuals for Sewing machines Brother S-7200C