Brother S-7200C Service Manual download pdf (Page 18)

S-7200A

4. FUNCTION SETTINGS

Function No. 69

No. Initial value Setting range Setting details

69 0

0–3

Actuator (option) function

0: No function

1: Stitch counter actuator

2: Sewing speed actuator

3: Option actuator

Connect to connector CN9 on the control circuit board.

・ The stitch counter warning LED illuminates when the stitch counter display reaches "-5".

(This is the same function as the "!" icon in the operation panel icon display.)

・ When the stitch counter actuator is pressed, treadle operation is possible.

(This is the same operation as the RESET key on the operation panel.)

Connect the switches to connector CN11 on the control circuit board.

・ When the low speed switch is pressed, the sewing speed becomes 1,000 rpm. The speed can be changed by setting

Function No. 122.

・ When the medium speed switch is pressed, the sewing speed becomes 3,000 rpm. The speed can be changed by setting

Function No. 121.

・ When the high speed switch is pressed, the sewing speed returns to the maximum sewing speed that has been set using

the MAX key.

Connect to connector CN9 on the control circuit board.

・ Set the operation using Function No. 11.

High speed

switch

Medium

speed switch

Low speed

switch

Stitch counter actuator

Stitch counter warning LED

Option Actuator

2249M

2250M

2251M

1 ... 17 18 19 ... 67

No comments

Brother S-7200C Service Manual Page 18