Brother S-7200C Service Manual download pdf (Page 16)

S-7200A

4. FUNCTION SETTINGS

Function No. 47−60

No. Initial value Setting range Setting details

47 0

0–1

Operation during standing operation when AUTO function is on

0: Operation stops when high speed pedal turns back on, and restarts when

off

1: Above function is not used

48 0

0–1

Thread trimming pedal function after thread trimming during standing

operation

0: Presser foot can be raised and lowered

1: Above operation not used (only possible using presser foot lifter pedal)

49 0

0–1

Alternate standing operation pedal and treadle operation (See NOTE 15)

0: Treadle operation is disabled after standing operation pedal is used

1: Treadle operation can also be used after standing operation pedal is used

(alternate operation is possible)

51* 0

0–1

Correction stitch sewing using actuator switch after thread trimming

0: Not possible (switch operation disabled)

1: Possible

52 2 (needles)

1–99 (needles)

Number of slow start stitches

53*

(needles)

0–100

(needles)

Count units for stitch counter display

0: No counting operation

1–100: Display counts down by number of stitches set

54* 1

0–2

Operation when stitch counter warning occurs ("!" icon is illuminated)

0: Starting using treadle is enabled as normal

1: Starting using treadle is disabled (thread trimming by depressing treadle

backward is possible)

2: Starting using treadle is completely disabled once treadle is returned to

neutral and operation stops

(NOTE 16)

0–1

Operation after treadle is depressed backward or knee switch is operated

when presser foot is raised

0: When treadle is returned to neutral, presser foot is raised

1: When treadle is returned to neutral, presser foot is lowered

56 0

0–1

Function for preventing needle bar operation when treadle is accidentally

depressed forward when it is returned to neutral after being depressed

backward

0: Used

1: Not used

(NOTE 17)

0–1

Operation when treadle is depressed forward to 1st step when presser foot is

raised

0: Presser foot is lowered

1: Presser foot is not lowered

58 0

0–1

Presser foot soft up function

0: Not used

1: Used (Function No. 59 and No. 60 must be set.)

59 0 (ms)

0–150 (ms)

60 0 (ms)

0–99 (ms)

Presser foot soft up timer setting

(When Function No. 58 is set to "1")

(NOTE 15) Presser foot lifter pedal operation is not included. In the case of simultaneous operation, the standing operation

pedal takes priority.

(NOTE 16) Setting is only enabled when DIP switch 1 is set to ON.

(NOTE 17) Setting is only enabled when DIP switch 2 is set to ON.

*… Settings indicated with " * " are enabled when the power is turned off and then back on.

(fully ON)

Presser foot lifting

2247M

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 66 67

Comments to this Manuals

No comments

Brother S-7200C Service Manual Page 16

Comments to this Manuals

Related products and manuals for Sewing machines Brother S-7200C