Brother QL-500 User Manual download pdf (Page 17)

The printer contains a paper guide which can hold up to 10 individual label sheets.

Push down the roll release lever and close the

DK Roll cover.

If the DK Roll edge cannot be pushed in just before the

cutter (as described in step 4), insert the edge of the DK

Roll as far as possible and pull down the release lever.

When finished, close the DK Roll cover.

Pressing Feed button feeds the DK Roll to the correct

position (when using DK Tape, cut the fed tape as

needed).

As shown in the right hand

illustration, attach the paper

guide to the front face of the

printer.

When printing more than 10

labels continuously using the

auto cut function, remove the

paper guide to prevent a paper

jam.

Plug the power cord into an electrical outlet.

• Check that the electrical outlet is 120V AC before

plugging the power cord.

• Unplug the power cord from the electrical outlet after

you have finished using the QL-500.

• Do not pull the power cord when unplugging it from

the electrical outlet. The wire in the power cord may

become damaged.

• Do not connect the QL-500 to the computer until directed to do so when

installing the printer driver. For how to install the printer driver and software,

refer to

Î "Software installation Guide".

3 Attaching the paper guide

Paper guide

4 Connecting the power supply

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 61 62

No comments

Brother QL-500 User Manual Page 17