Brother MFC-9700 User Manual Page 203

  • Download
  • Add to my manuals
  • Print
  • Page
    / 228
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 202
TROUBLESHOOTING AND ROUTINE MAINTENANCE
21 - 22
Follow these steps to replace the drum unit:
1
Open the front cover.
2
Remove the old drum unit. Place the drum
unit on a drop cloth or disposable paper to
avoid scattering toner.
3
Hold down the lock lever on the right and
pull the toner cartridge out of the drum unit
assembly. (See
Replacing the Toner
Cartridge,
page 21-18.)
4
Wait to unpack the new drum unit until immediately before installing it. Place
the old drum unit into the aluminium bag and discard it according to local
regulations.
5
Reinstall the toner cartridge into the new drum unit. (See Replacing the Toner
Cartridge,
page 21-18.)
6
Reinstall the new drum unit, keeping the front cover open.
7
Press .
8
Press 1 and when the LCD shows
ACCEPTED, and close the front cover.
Caution
If toner scatters and your hands or clothes get dirty, immediately wipe off or
wash with cold water.
Checking the Drum Life
You can see the percentage of the drums life that remains available.
1
Press Menu, 2, 0, 3.
2
For five seconds, the LCD shows the
available percentage of drum life.
Discard the used drum unit according to local regulations. If you are not sure of
them, call your local Sanitation Department. Be sure to seal the drum unit
tightly so toner powder does not spill out of the unit. When discarding used
drum units, keep them separate from domestic garbage.
Even if the remaining drum life is 0%, you may continue to use the drum unit
until you have a print quality problem.
Lock
Lever
REPLACE DRUM?
1.YES 2.NO
3.DRUM LIFE
Page view 202
1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 227 228

Comments to this Manuals

No comments