Frame and Line Drawing
Note;
You can draw a double horizontal line if you have keyboard 2 selected and an International
daisy wheel fitted, which has the ledger line symbol (=).
You can also draw double lines if you have keyboard 3 selected and a Symbol daisy wheel
fitted.
Immediately after pressing the [FRAME] key for the first time, press [=] before moving
the carriage to the right When you press the [FRAME] key again, followed by the
[RETURN] key, the line will be printed double.
Vertical Line Drawing
To draw a vertical line:
2.
Position the carriage where you want the top of the line to start (A), using the above
keys as required.
Press the [FRAME] key. The message -:SFRflriIN8 will appear in the display.
3. Move the carriage to the point where you want the bottom of the line (B), using
[INDEX], [R INDEX], [CODE] + [INDEX], [CODE] + [R INDEX], as required, to
position it precisely.
4, Press the [FRAME] key again, then the [RETURN] key, as before. The line will be printed,
and the carriage will then return to its original position.
[FRAME]
г
г
[FRAME]
В
Comments to this Manuals