Brother FAX-1960C User Manual

Setup is Complete!Quick Setup GuideSetting Up the MachineFAX-1960C Before you can use the machine, you must set up the hardware. Please read this Quic

Setting Up the Machine8 7 Print quality check1 After the cleaning cycle is finished, the LCD shows: Set Paper andq Press Start2 Make sure paper is lo

Setting Up the Machine9 8 Setting the LCD contrastYou can adjust the LCD contrast for a sharper and more vivid display. If you are having difficulty

Setting Up the Machine10 10 Setting your station IDYou should store your name and fax number to be printed on all fax pages that you send.1 Press Men

Setting Up the Machine11 12 Choosing a Receive ModeThere are three possible receive modes: Fax Only, Fax/Tel and Manual. 1 Press Menu, 0, 1.2 Press a

Setting Up the Machine12 14 Sending in the Product Registration and Test Sheet 1 Fill out the Product Registration and Test Sheet. 2 Put the sheet fa

Setting Up the Machine13 15 Installing the battery1 Insert the connector (1) of the battery (2) in the direction shown below. 2 Place the battery in

Setting Up the Machine14 17 Choosing a location Choose a location where the temperature remains between 50° F and 95° F (10° and 35° C). DO NOT put

Consumables15 1 1Replacement consumablesWhen the time comes to replace ink cartridges, an error message will be indicated on the LCD. For more inform

TrademarksThe Brother logo is a registered trademark of Brother Industries, Ltd.Brother is a registered trademark of Brother Industries, Ltd.Windows a

USA

1Symbols used in this guide Warning Caution Improper SetupWarnings tell you what to do to prevent possible personal injury.Cautions specify procedur

Getting Started1 1 1Carton componentsCarton components may vary from one country to another.Save all packing materials and the carton in case for any

Getting Started2 2Control panel 1Shift2 One Touch keys3 Fax and Telephone keys4Ink key5 Copy Options key6 Dial Pad7 Clear/Back key8OK key9Start keys1

Setting Up the Machine3 1 1 Removing the protective parts1 Remove the protective tape.2 Remove the foam bag containing the ink cartridges from on top

Setting Up the Machine43 Press and slide the paper side guides (1) and paper length guide (2) to fit the paper size. 4 Fan the stack of paper well to

Setting Up the Machine5 4 Connecting the phone line 1 Connect the telephone line cord. Connect one end of the telephone line cord to the jack on the

Setting Up the Machine6 6 Installing the ink cartridgesWarningIf ink gets in your eyes, wash them out with water at once, and if irritation occurs co

Setting Up the Machine76 Install each ink cartridge in the direction of the arrow on the label. Take care to match the color of the lock release lever