Brother HL-4200CN User Manual download pdf (Page 62)

3 - 14 LOADING PAPER AND USABLE PAPER TYPES

Grip the A5 spacer as you gently lift it up while

pulling it forward and removing it from its position

next to the paper guide.

Insert the A5 spacer into its storage slot in the paper

tray.

Gently lift the end paper guide to move it, and insert

the pins at the bottom of the guide in the holes

(indicated by the mark) corresponding to the

paper size that you want to load.

Make sure that the end guide is properly inserted

into the holes for the paper size.

If the end paper guide is not inserted properly into

the hole it could prevent automatic paper size

detection. If this occurs, move the end paper guide

all the way to its outermost position again, and then

realign it with the appropriate paper size mark.

Align the four corners of the paper stack and insert

the paper (print side up) under the tab.

■ Do not use paper that is folded, creased, or

warped.

■ Make sure that all the paper is under the tab.

■ Do not overload the paper tray.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 165 166

No comments

Brother HL-4200CN User Manual Page 62