Brother MFC-230C User Manual download pdf (Page 161)

Network Scanning (For models with built-in network support)

155

Scan to File 12

When you choose Scan to File, you can scan a black and white or color document and send it directly to the

Macintosh

you designate on your network. The file will be saved in the folder and file format that you have

configured in ControlCenter2 on the designated Macintosh

. You can change the Scan configuration. (See

File on page 141.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Sca n to File.

Press OK.

d Press a or b to choose the destination Macintosh

you want to send to.

Press OK.

If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination

Macintosh

on the control panel.

Press OK.

Note

For DCP models, press a or b repeatedly to enter the first digit of the PIN number. Press c to move the

cursor, then use a or b to enter the second digit. Repeat until you have entered all four digit of the PIN

number. Press OK.

e Press Black Start or Color Start.

The machine starts the scanning process.

Note

• If you want to change between color and black and white scanning, choose color or black and white in the

scan type option on the Device Button tab of the ControlCenter2 configuration screen. (See

SCAN on page 135.)

• If you would like to change the file name of scanned documents, enter the file name in the File Name

section on the Device Button tab of the ControlCenter2 configuration.

• Scan type depends on the settings of the Device Button tab, Black Start or Color Start do not change

the settings.

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 167 168

No comments

Brother MFC-230C User Manual Page 161