Brother PT-9700PC User Manual download pdf (Page 40)

39

■ Barcode printing

A barcode scanned with the barcode reader

can be printed with the protocol and size

from a previously created template.

1

Using Transfer Manager, transfer (from

P-touch Editor 5.0 to the printer) the

barcode template to be printed.

2

When data is transferred to

“Configurations” in Transfer Manager,

the “Key Assign” number is automatically

specified.

3

Scan the “P-touch template command”

barcode.

Refer to “List of barcodes for specifying

settings” (→ P.51).

4

From the “Basic settings” barcodes, scan

the barcode for the parameter whose

setting is to be specified.

5

Scan the “Select template” barcode, and

then scan the barcodes under “For

entering numbers” to specify the “Key

Assign” number (three digits) for the

barcode template.

Note

● For details on the barcodes that can be

scanned for the various settings, refer to

“List of barcodes for specifying settings”

(→ P.51).

● If the barcode to be scanned with the

barcode reader has a different protocol

than the barcode in the previously

created template, it may not be possible

for the barcode to be created and printed.

Note

● Be sure to create barcode templates that

comply with the limits on the size and

number of digits for the barcode to be

created. The barcode cannot be created if

it exceeds the number of digits specified

in the template.

(CODE128/9-digit/2.7"×0.65")

Note

● Settings can be specified for multiple

parameters.

● If no settings have been specified, a label

will be printed by P-touch Template

Settings. The default settings for P-touch

Template Settings is a single copy with

“Auto cut on” and “Half cut on”. For

details on P-touch Template Settings,

download “P-touch Template manual”

(English only) from the following web

site.

http://solutions.brother.com/

[Select your region/country]-[Choose

your product]-[Downloads].

● To specify the number of copies to be

printed, scan the “Number of copies”

barcode, and then scan the barcodes

under “For entering numbers” to specify a

three-digit number. The setting is

automatically applied when three digits

have been specified.

Example:

Specify numbers by scanning barcodes as

follows: 7→[00][7], 15→[0][1][5]

● To change the setting for the number of

copies, scan the “Number of copies”

barcode again, and then scan the

barcodes for the new three-digit number.

Note

● The setting is automatically applied when

three digits have been specified.

Example:

Specify numbers by scanning barcodes as

follows: 7→[00][7], 15→[0][1][5]

● To change the number, scan the “Select

template” barcode again, and then scan

the barcodes for the new three-digit

number.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 117 118

Comments to this Manuals

No comments