Brother LX2375 User Manual download pdf (Page 14)

KNOWING YOUR SEWING MACHINE

—

———————————————————————————————————————

—

Upper threading

Set the upper thread and thread the needle.

Turn off the sewing machine.

Raise the presser foot using the presser foot lever.

a Presser foot lever

Raise the needle by turning the handwheel

toward you (counterclockwise) to raise the

thread take-up lever to its highest position.

• If the needle is not correctly raised, the sewing

machine can not be threaded. Be sure to turn the

handwheel before threading the sewing machine.

Pull up the spool pin as far as possible, and

then put a spool of thread on this pin.

While holding the thread from the spool with

your right hand, pass the thread toward you,

in the groove on the thread guide.

• Make sure that the spring in the groove

catches the thread

a Spring

Pull the thread down and around the upper

tension control dial from the right to the left so

the thread picks up the thread check spring.

a Upper tension control dial

b Thread check spring

a Spool pin

b Thread guide (rear)

c Thread guide (front)

d Thread take-up lever

● Make sure you thread the machine properly. Otherwise, the thread could tangle and break the needle.

CAUTION

● If the spool of thread is in the wrong place, or

is set incorrectly, the thread may tangle on

the spool pin and cause the needle to break.

CAUTION

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 95 96

No comments

Brother LX2375 User Manual Page 14