Brother LX2375 User Manual download pdf (Page 30)

UTILITY STITCHES —————————————————————————————————————————————————

—

Darning

Reinforce points that will be subject to strain.

Place the darning plate on the needle plate as

shown below, and then remove both the

presser foot and presser foot holder assembly.

Place the fabric to be darned under the

presser foot together with a fabric underlay

for reinforcement.

Start sewing while gently moving the fabric

with your hands, alternately drawing the

fabric away and pulling it toward you.

Stop sewing when the portion to be darned is

filled with parallel stitching.

Over edge stitch

The Overlock Stitch is used to prevent the edge of

the fabric from fraying.

Place the edge of the fabric under the presser foot so

the needle enters the fabric when the left side of the

zigzag stitch is sewn and misses the edge of the

fabric with the right side of the stitch. Sew with this

needle position along the edge of the fabric.

Stitch width

Stitch length F-2

Needle position M

Presser foot None

Needle Single

Other Darning plate

Stitch width

3-5

Stitch length

3-4

Needle position L

Presser foot Zigzag

Needle Single

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 95 96

No comments

Brother LX2375 User Manual Page 30