Brother SE-270D Instruction Manual download pdf (Page 142)

136

EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Appliquéing

With embroidery patterns that display "APPLIQUE",

you can appliqué. Prepare the base fabric and the

appliqué fabric (appliqué piece).

Select an appliqué pattern.

When "APPLIQUE MATERIAL" is displayed on

the LCD, apply the stabilizer material to the

back of the appliqué piece fabric, and stretch

it on the embroidery frame.

Lower the presser foot lever, and press

(Start/stop button).

X The cut-out for the appliqué piece is sewn,

and the sewing machine stops.

a Cut-out line

b Appliqué piece fabric

X "APPLIQUE POSITION" will be displayed on

the LCD.

Remove the fabric from the embroidery frame,

and cut it out along the stitching.

Cut carefully along the stitching and remove

the thread.

• If it is not cut right on the stitching, it will not

be finished neatly.

Stretch the base fabric on the embroidery

frame.

Set up the thread for appliquéing.

Lower the presser foot lever, and press

(Start/stop button).

X The position for the appliqué is stitched, and

the sewing machine stops.

a Appliqué position

b Base fabric

X "APPLIQUE" will be displayed on the LCD.

Apply a thin layer of fabric glue or spray

adhesive to the back of the appliqué piece, and

attach it in the appliqué position.

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 165 166

No comments

Brother SE-270D Instruction Manual Page 142