Brother SE-270D Instruction Manual download pdf (Page 148)

142

EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Thread runs out partway

through a design

When the upper thread or the bobbin thread runs out

while sewing, the sewing machine stops. Move the

needle back about ten stitches and resume sewing.

Set up the upper or bobbin thread.

Press .

Press (Back one stitch) to move the

needle back about 10 stitches.

(Forward one stitch) increases the stitch

number.

Restart the embroidery.

Stopping while embroidering

If the embroidery is stopped before it is complete,

check the current needle count before turning off the

sewing machine.

Memo

z When the sewing machine is turned off, the

embroidery size and layout return to the

original setting.

Press (Start/stop button) to stop the

sewing machine.

Check the current needle count on the LCD

and make a note of it.

If the needle count is not displayed, press

(Settings key) to switch the display.

Press (Back key) to return to the embroidery

screen.

Press (Embroidery key).

X The screen for checking the pattern is

displayed.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 165 166

No comments

Brother SE-270D Instruction Manual Page 148