Brother P-touch RL-700S User Manual download pdf (Page 34)

Cleaning and maintenance

Cleaning the print head and head roller

If horizontal lines are printed on the labels or the prints are not very clear, the print head or head

roller may need to be cleaned. Follow the steps below to clean the print head and head roller.

1 Clean the print head with the self cleaning function.

1 Press the Open Cover button to open the cover of the printer.

2 Remove the tape cassette.

3 Close the cover.

4 Press the Feed and Cut button.

Self-cleaning will be performed.

5 Press the Open Cover button to open the cover of the printer.

6 Put back the tape cassette and close the cover.

2 Cleaning with a cotton bud.

1 Turn off the power with the ON/OFF button

and pull out the AC plug.

2 Press the Open Cover button to open the

cover of the printer.

3 Remove the tape cassette.

4 Clean the print head and head roller with a

cotton bud.

5 Put back the tape cassette and close the cover.

Warning

• Do not touch the cutter blade.

• The print head is at a high temperature immediately after labels are printed. Avoid cleaning

the print head immediately after printing as doing so may burn your fingers.

Memo

Cleaning tape TZ-CL6 (width: 36 mm) is available to purchase to ease cleaning. For details of how

to use the cleaning tape, refer to the documentation provided with the tape.

Cotton bud

Print head

Cotton bud

Head roller

Print head

Head roller

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 180 181

No comments

Brother P-touch RL-700S User Manual Page 34