Brother MFC-7240 User's Guide download pdf (Page 108)

100

Setting Dial Tone detection B

When you send a fax automatically, by

default your machine will wait for a fixed

amount of time before it starts to dial the

number. By changing the Dial Tone setting to

Detection you can make your machine dial as

soon as it detects a dial tone. This setting can

save a small amount of time when sending a

fax to many different numbers. If you change

the setting and start having problems with

dialling you should change back to the default

No Detection setting.

a Press Menu, 0, 5.

Press Menu, 0, 4 (for New Zealand).

b Press a or b to choose Detection or

No Detection.

Press OK.

c Press Stop/Exit.

Telephone line interference/

VoIP B

If you are having difficulty sending or

receiving a fax due to possible interference

on the telephone line, we recommend that

you adjust the equalization for compatibility to

reduce the modem speed for fax operations.

a Press Menu, 2, 0, 1.

b Press a or b to choose Basic(for

VoIP), Normal or High (FAX-2840,

FAX-2950 and MFC-7290).

 Basic(for VoIP) cuts the modem

speed to 9600 bps. When you

change the Compatibility to

Basic(for VoIP), the ECM

feature is only available for fax

sending.

For a standard telephone line: If you

regularly experience interference on

your standard telephone line try this

setting.

If you are using VoIP: VoIP service

providers offer fax support using

various standards. If you regularly

experience fax transmission errors

try this setting.

 Normal sets the modem speed at

14400 bps.

 High sets the modem speed at

33600 bps (FAX-2840, FAX-2950

and MFC-7290).

Press OK.

c Press Stop/Exit.

Note

VoIP (Voice over IP) is a type of phone

system that uses an Internet connection,

rather than a traditional phone line.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 143 144

Comments to this Manuals

No comments