Brother MFC-3240C User Manual download pdf (Page 143)

USING YOUR MACHINE WITH A MACINTOSH

8 - 21

Configuring Network Scanning

(For Network models only)

If you want to scan from the machine on a network, you must select

the networked machine in the Device Selector application located in

Macintosh HD/Library/Printers/Brother/Utilities. If you already

installed the MFL-Pro Software following the network installation

steps in the Quick Setup Guide then this selection should already be

made.

To use the machine as a Network Scanner, the machine must be

configured with a TCP/IP address. You can set or change the

address settings from the control panel. (Please see the Network

User's Guide on the CD-ROM.)

(Network scanning is not available for the DCP-110C.)

(The ControlCenter2.0 is not available for Mac OS

8.6-9.2.)

From Library, select Printers, Brother, Utilities and

DeviceSelector, and then doubleclick DeviceSelector.

The DeviceSelector window appears. This window can also be

opened from the ControlCenter2.0.

Select Network from the connection type pull-down menu.

Max. 25 clients can be connected to one machine on a Network.

For example, if 30 clients try to connect at a time, 5 clients will

not be shown on the LCD.

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 172 173

No comments

Brother MFC-3240C User Manual Page 143