Brother MFC-J615W User Manual download pdf (Page 69)

Routine maintenance

63

A

Packing and shipping

the machine

A

When you transport the machine, use the

packing materials that came with your

machine. If you do not pack the machine

properly, any damage that may occur in

transit may not be covered by your warranty.

IMPORTANT

It is important to allow the machine to

“park” the print head after a print job.

Listen carefully to the machine before

unplugging it to make sure that all

mechanical noise has stopped. Not

allowing the machine to finish this parking

process may lead to print problems and

possible damage to the print head.

a Open the ink cartridge cover.

b Press the ink release levers to release

the ink cartridges and then take out the

ink cartridges. (See Replacing the ink

cartridges in appendix A in the Basic

User’s Guide.)

c Install the green protective part and then

close the ink cartridge cover.

IMPORTANT

• Make sure that the plastic tabs on both

sides of the green protective part (1) have

securely clicked into place (2).

• If you are not able to find the green

protective part, DO NOT remove the ink

cartridges before shipping. It is essential

that the machine be shipped with either

the green protective part or the ink

cartridges in position. Shipping without

them will cause damage to your machine

and may void your warranty.

1

2

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 78 79

Comments to this Manuals

No comments