Brother MFC-J6510DW User's Guide download pdf (Page 82)

d Turn the green release lever on the

orange protective packing (1) clockwise

until it clicks to release the vacuum seal.

Then remove the orange protective

packing as shown.

e Each color has its own correct position.

Insert the ink cartridge in the direction of

the arrow on the label.

f Gently push the back of the ink cartridge

marked “PUSH” until it clicks, and then

close the ink cartridge cover.

g The machine will automatically reset the

ink dot counter.

Note

• If you replaced an ink cartridge, for

example Black, the LCD may ask you to

verify that it was a brand new one (for

example, Did You Change Black).

For each new cartridge you installed,

press 1 (Yes) to automatically reset the

ink dot counter for that color. If the ink

cartridge you installed is not a brand new

one, be sure to press 2 (No).

• If the LCD shows No Ink Cartridge or

Cannot Detect after you install the ink

cartridges, check that the ink cartridges

are installed properly.

CAUTION

If ink gets in your eyes, wash it out with

water at once and call a doctor if you are

concerned.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 162 163

No comments

Brother MFC-J6510DW User's Guide Page 82