7. FOLDING MACHINE
BAS-7610
7-08
1. Seam deviates down in parallel.
<Cause>
A. The pocket material is improperly folded because the center blade is positioned above the correct
position.
After loosening the eight bolts (1), shift the center blade forward in the loose holes of the connecting blocks
(center blade) then fasten the bolts (1).
At this time, the inner clamp assembly and the folding clamp assembly may both need to be shifted forward at
the same time.
Connectin
block
Bolt 5X25
Inner clamp 3-corner J
Inner clamp U 1
Folding plate supporter
Folding plate
supporter
Folding plate
supporter
Inner clam
U 2
Folding plate
supporter
Inner clamp U 3
Inner clam
U 3
Inner clamp assembly
1790S
Connecting block
(1) Bolt 4X20
Plate spring R 0.8
Plate spring L 0.8
Center blade assembly
1789S
Connecting pin
Center blade 3-corner J
Connecting block SR assembly
Bolt 5X25
Folding clamp 3-corner J
Connecting block SL assembly
Bolt 4X8
Adjusting screw
Settin
plate
Tucking blade R-3J
Tucking blade L-3J
Tucking blade LD-3J
Tucking blade RD-3J
Chamfering blade RJ
Chamferin
blade LJ
1792S
Folding clamp assembly
Connectin
in
Comments to this Manuals