5. ADJUSTMENT
BAS-7610
5-03
4. Attach the zigzag gauge (8) (accessory) to the bed. Using the two flat screws.
5. Attach a needle. (thin needle equivalent to #9-11)
6. The needle is aligned with needle hole A of the zigzag gauge (8). Adjust → Loosen the screw (11), move the needle
bar bracket (10) in the direction of the arrow
7. The needle : Lowest position → Turn the pulley
Align the index marks of the zigzag adjust fork (12) and the zigzag cam (13). Adjust → Loosen the two screws (14)
8. The needle does not move sideways. Adjust → Turn the zigzag adjust screw (7) for the zigzag adjust arm (5)
If the needle moves to the front (toward the carved mark), turn the zigzag adjust screw (7) clockwise. (when seen from
the end)
If the needle moves toward the rear, turn the zigzag adjust screw (7) counterclockwise. (when seen from the end)
(8)
(9)
A
Needle
1310S
(10)
(11)
(12)
(13)
(14)
(12)
(13)
Index mark
1312S
1313S
(7)
Index mark
B
A
A
B
Index mark
(5)
To front
To rear
131 1S
1675S
Lowest position
Comments to this Manuals