Brother KE-434C Instruction Manual download pdf (Page 63)

13. CHANGING SPECIAL FUNCTIONS USING THE MEMORY SWITCHES

KE-434C,435C

30 to 4F are set by entering two-digit values.

These values are incremented using the P2 switch, and decremented using the P4 switch.

Switch Possible setting range Units Initial value Explanation

memo-30 0 - 99 mm 99

Limits the maximum area in the horizontal direction (X).

(If the value is set to 99, the maximum length allowed will be 100

mm)

memo-31 0 - 60 mm 60

Limits the maximum area in the vertical direction (Y).

memo-32 12 - 25 × 100rpm 25 Changes the maximum sewing speed.

memo-33 1 - 10 × 7.5° 5

Changes the feed timing.

1 (Fast) ← 5 (Standard) → 10 (Slow)

memo-34 0 - 5 Stitch 0

The (setting value + 1) number of stitches are sewn at the speed

set by memo-35 at the sewing start. (No low-speed sewing if set

to 0.)

memo-35 3 - 9 × 100rpm 4

Changes the sewing start speed for the number of stitches

specified by memo-34.

memo-36 −−−

−

memo-37 1 - 20 × 7.5° 10

Changes the feed timing one stitch before the sewing end.

1 (Fast) ← 10 (Standard) → 20 (Slow)

memo-38 1 - 20 × 7.5° 10 Changes the feed timing two stitches before the sewing end.

memo-39 1 - 20 × 7.5° 10

Changes the feed timing for the third stitch at the sewing start.

memo-3A 1 - 20 × 7.5° 10

Changes the feed timing for the second stitch at the sewing start.

memo-3b 1 - 20 × 7.5° 10

Changes the feed timing for the first stitch at the sewing start.

memo-3c 0 - 99 Stitch 0

Sets the number of stitches for which the feed timing (memo-33

setting) is enabled.

0: Enabled for all stitches

1 - 99: Enabled for the specified number of stitches from the

sewing start

memo-3d −−−

−

memo-3E −−−

−

memo-3F −−−

−

memo-40 1 - 5 − 4

Changes the test feeding speed (with no material).

1 (Fast) ←→ 5 (Slow)

memo-41* 1 - 99 × 10ms 10

Changes the standby time after the stepping foot is raised.

0 - 10 −

For KE-434C solenoid specifications, the work clamp operating

mode can be changed. (When set to “0”, the mode is selected

according to the settings for DIP switches A-1 and A-2.)

Refer to “14. SETTING THE WORK CLAMP MODE” for details of

the available modes.

KE-434C pneumatic specifications and KE-435C

memo-42

0 - 13 −

KE-434C inner clamping device specifications

memo-43 1 - 3 − 3

Changes the allowable speed/sewing pitch.

1 (Fast) ←→ 3 (Standard)

Changes the path taken when moving from the machine home

position to the start position.

0: Across inside of work clamp, 1: Top-left, 2: Bottom-left,

3: Bottom-right

memo-44 0 - 3 −

KE-434C inner clamping device specifications (Does not pass

across inside of clamp)

memo-45

memo-4F

−−−

−

*KE-435C only.

1 ... 62 63 64 ... 83

Comments to this Manuals

No comments

Brother KE-434C Instruction Manual Page 63

Comments to this Manuals

Related products and manuals for Sewing machines Brother KE-434C