Brother XE5427-001 User Manual download pdf (Page 61)

Embroidering 59

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Remove the upper thread.

Note

z Be sure to raise the presser foot lever before

removing the upper thread. If you remove

the upper thread with the embroidery foot

lowered, it may cause malfunction.

Set up embroidery thread for the next color,

and repeat steps

b through h.

X When the last color is embroidered,

"Finished sewing." will appear on the

display. Press , and the display will

return to the initial screen.

Cut the excess thread.

Memo

z For the programmed thread cutting setting,

refer to "Setting for embroidering" (page 52).

Appliquéing

Prepare the base fabric and the appliqué fabric

(appliqué piece). Press (Settings key), and set

the thread color display to NAME OF COLOR, so

"APPLIQUE MATERIAL", "APPLIQUE POSITION" and

"APPLIQUE" are displayed on the screen.

Select an appliqué pattern.

X "APPLIQUE MATERIAL" is displayed on the

screen.

Apply iron-on stabilizer to the back of the

appliqué piece fabric, and stretch it on the

embroidery frame.

Lower the presser foot lever, and press

(Start/stop button).

X The cut-out for the appliqué piece is sewn,

and the machine stops.

a Cut-out line

b Appliqué piece fabric

X "APPLIQUE POSITION" will be displayed on

the screen.

chapter2 Page 59 Monday, August 18, 2008 8:01 PM

1 ... 60 61 62 ... 92

No comments

Brother XE5427-001 User Manual Page 61