Brother XE5427-001 User Manual download pdf (Page 85)

Troubleshooting 83

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

You pressed the back key or the embroidery key when a pattern was

selected.

You tried to select an embroidery pattern or change the layout when

the needle was down.

The machine is turned on while the needle is lowered and the

embroidery unit is attached.

You tried to initialize the embroidery unit with the embroidery foot

lowered.

When 13 or more patterns are in “Removable Disk”, a pattern was

being retrieved.

The start/stop button was pressed after selecting a pattern which is

saved in the machine's memory or entered from the USB port without

pressing (Retrieve key).

The needle position button or thread cutter button was pressed while

the bobbin winder shaft is moved to the right.

15 A pattern is being saved.

16 The start/stop button was pressed when no pattern is selected.

Bobbin thread has run out.

Little bobbin thread remains.

Error Message Probable Cause

appendix1 Page 83 Monday, August 18, 2008 8:08 PM

1 ... 84 85 86 87 88 89 90 91 92

No comments

Brother XE5427-001 User Manual Page 85