Brother MFC-990CW Setup Guide download pdf (Page 16)

Windows

USB

Connect the USB cable

a Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

b Connect the USB cable to the USB socket

marked with a symbol. You will find the

USB socket inside the machine on the right as

shown below.

c Carefully guide the USB cable through the

trench as shown below, following the trench

around and toward the back of the machine.

Then connect the cable to your computer.

d Lift the scanner cover to release the lock a.

Gently push the scanner cover support

down b and close the scanner cover c.

Important

• DO NOT connect the machine to a USB port

on a keyboard or a non-powered USB hub.

• Connect the machine directly to your

computer.

LAN USB

Important

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 46 47

No comments

Brother MFC-990CW Setup Guide Page 16