Brother FAX-1360 User's Guide download pdf (Page 32)

18

5

Entering Fax mode 5

To enter fax mode, press (Fax), and

the key will glow green.

Faxing from the ADF 5

a Make sure you are in Fax mode .

b Put the document face down in the ADF.

c Dial the fax number.

d Press Start.

The machine starts scanning the

document.

Note

• To cancel, press Stop/Exit.

• If the memory is full, the fax will be sent in

real time.

Canceling a fax in progress 5

If you want to cancel a fax while the machine

is scanning, dialing or sending, press

Stop/Exit.

Broadcasting 5

Broadcasting is when the same fax message

is automatically sent to more than one fax

number. You can include Groups,

One-Touch, Speed-Dial numbers, and up to

50 manually dialed numbers in the same

broadcast.

After the broadcast is finished, a Broadcast

Report will be printed.

a Make sure you are in Fax mode .

b Load your document.

c Enter a number. Press OK.

You can use either a One-Touch, a

Speed-Dial, a Group, or a manually

entered number.

d Repeat c until you have entered all the

fax numbers you wish to broadcast to.

e Press Start.

Note

• If you did not use up any of the numbers

for Groups, access codes or credit card

numbers, you can ‘broadcast’ faxes to as

many as 160 different numbers.

• The available memory will vary depending

on the types of jobs in the memory and the

number of locations used for

broadcasting. If you broadcast to the

maximum numbers available, you will not

be able to use dual access.

• Enter the long dialing sequence numbers

as you would normally, but remember that

each One-Touch and Speed-Dial number

counts as one number, so the number of

locations you can store becomes limited.

• If the memory is full, press Stop/Exit to

stop the job. If more than one page has

been scanned, press Start to send the

portion that is in the memory.

Sending a fax 5

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 117 118

Comments to this Manuals

No comments