Brother IntelliFAX 4100e User Manual download pdf (Page 91)

REMOTE FAX OPTIONS

9 - 5

Remote Commands

Follow the commands below to access features remotely. When you call your

machine and enter your Remote Retrieval Access Code (1 5 9 ), the system

will signal you with two short beeps to enter a remote command.

Remote Commands Operation Details

95 Changing Fax

Forwarding

/Paging setting

1 OFF If you hear one long beep, the change is accepted. If you

hear three short beeps, you cannot change it because the

conditions have not been met. (Example: registering

paging number). You can register your fax forwarding

number by using 4. FAX FWD NO (See Page 9-6). Once

you have registered the number, your machine will

change automatically to FAX FWD:ON mode.

2 Fax Forwarding

3 Paging

4 FAX FWD No.

6 Fax Storage ON

7 Fax Storage OFF You can set FAX STORAGE to ON or OFF.

96 Retrieve a fax

2 Retrieve all faxes Enter the number of a remote fax machine to receive

stored fax message(s). (See Page 9-6.)

3 Erase fax from the

memory

If you hear one long beep, you can erase fax message(s)

from the memory.

97 Check the Receiving

Status

1 Fax You can check whether your machine has received any

fax message(s). If yes, you will hear one long beep. If no,

you will hear three short beeps.

98 Change Receive Mode

1 TAD If you hear one long beep, you can change the Answer

Mode.

If you hear three short beeps, you cannot change it.

2 FAX/TEL

3 FAX

90 Exit After a long beep, you can exit remote retrieval.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 155 156

No comments

Brother IntelliFAX 4100e User Manual Page 91