Brother MFC-7860DN User's Guide download pdf (Page 43)

Loading paper

17

2

Acceptable paper and

other print media 2

Print quality may vary according to the type of

paper you are using.

You can use the following types of print

media: thin paper, plain paper, thick paper,

bond paper, recycled paper, labels or

envelopes.

For best results, follow the instructions below:

 DO NOT put different types of paper in the

paper tray at the same time because it

may cause paper jams or misfeeds.

 For correct printing, you must choose the

same paper size from your software

application as the paper in the tray.

 Avoid touching the printed surface of the

paper immediately after printing.

 Before you buy a lot of paper, test a small

quantity to make sure the paper is

suitable.

Recommended paper and

print media 2

Type and size of paper 2

The machine loads paper from the installed

standard paper tray or manual feed slot.

The name for the paper trays in the

printer driver and this Guide are as

follows:

2

Paper capacity of the paper trays 2

Paper Type Item

Plain paper

Xerox Premier TCF 80 g/m

2

Xerox Business 80 g/m

2

Recycled Paper

Xerox Recycled Supreme

80 g/m

2

Labels Avery laser label L7163

Envelope Antalis River series (DL)

Tray and optional unit Name

Standard paper tray Tray 1

Manual feed slot Manual

Paper size Paper type No. of sheets

Paper Tray

(Tray 1)

A4, Letter, B5,

Executive, A5, A5 (Long

Edge), A6, B6

Plain paper, Thin paper

and Recycled paper

up to 250 [80 g/m

2

]

Manual feed slot

(Manual)

Width: 76.2 to 216 mm

Length: 116 to 406.4 mm

Plain paper, Thin paper,

Thick paper,

Thicker paper,

Bond paper,

Recycled paper,

Envelopes and Labels

Single sheet

[80 g/m

2

]

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 156 157

Comments to this Manuals

No comments