Brother DCP-120C User Manual download pdf (Page 10)

Setting Up the Machine

STEP1

7 Print quality check

1 After the cleaning cycle is finished, the LCD

shows:

Set Paper and

Press Start

2 Make sure the paper is loaded in the paper

tray.

Press Colour Start.

The machine starts printing the Print Quality

Check Sheet (only during initial ink cartridge

installation).

3 Check the quality of the four colour blocks on

the sheet.

(black/ cyan/ yellow/ magenta)

Improper Setup

Avoid touching the printed surface of the

paper immediately after printing, the surface

may not be completely dry and may stain your

fingers.

4 The LCD shows:

Is Quality OK?

a Yes b No

5 Do one of the following:

 If all lines are clear and visible, press a

(Yes) to finish the quality check.

 If you can see missing short lines, press b

(No) and go to step 6.

6 The LCD asks you if the print quality is OK for

black and colour. Press a (Yes) or b (No) .

Black OK?

a Yes b No

After pressing a (Yes) or b (No) for both black

and colour, the LCD shows:

Start Cleaning?

a Yes b No

7 Press a (Yes), the machine will then start

cleaning the colours.

8 After cleaning is finished, press Colour Start.

The machine starts printing the Print Quality

Check Sheet again and goes back to step 3.

Print Quality Check

1. Check the qu ality of the four-color blocks formed by th e short lines.

2. If all the short lines are clear and visible, the qu ality is acceptable. the quality is acc eptable.

Select (Yes). If you can see missing s hort li nes, sele ct (No) to be gin the color cl eaning process

and follo w the prompts on the LCD.

OK Poor

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 32 33

Comments to this Manuals

No comments

Brother DCP-120C User Manual Page 10

Comments to this Manuals

Related products and manuals for Printers Brother DCP-120C