Brother DCP-350C User Manual download pdf (Page 82)

PhotoCapture Center

Difficulties

Difficulty Suggestions

Removable Disk does not work

properly.

1 Have you installed the Windows

2000 update? If not, do the following:

1) Unplug the USB cable.

2) Install the Windows

2000 update using one of the following methods.



Install MFL-Pro Suite from the CD-ROM. (See the Quick Setup Guide.)

 Download the latest service pack from the Microsoft Web site.

3) Wait about 1 minute after you restart the PC, and then connect the USB

cable.

Take out the memory card or USB Flash memory drive and put it back in again.

3 If you have tried ‘Eject’ from within Windows

, take out the memory card or

USB Flash memory drive before you continue.

4 If an error message appears when you try to eject the memory card or USB

Flash memory drive, it means the card is being accessed. Wait a while and

then try again.

If all of the above do not work, turn off your PC and machine, and then turn them

on again. (You will have to unplug the power cord of the machine to turn it off.)

Cannot access Removable Disk

from Desktop icon.

Make sure that you have correctly inserted the memory card or USB Flash

memory drive.

Network Difficulties

Difficulty Suggestions

Cannot print over the Network. Make sure that your machine is powered on and is online and in Ready mode.

Print a Network Configuration list (see Printing Reports on page 9) and check the

current Network settings printed in this list. Reconnect the LAN cable to the hub to

verify that the cabling and network connections are good. If possible, try

connecting the machine to a different port on your hub using a different cable. If

the connections are good, the machine shows LAN Active for 2 seconds.

(If you are having Network problems, see the Network User’s Guide on the

CD-ROM for more information.)

The network scanning feature does

not work.

(For Windows

users only) Firewall settings on your PC may be rejecting the

necessary network connection. Follow the instructions below to configure the

Firewall. If you are using personal Firewall software, see the User’s Guide for your

software or contact the software manufacturer.

For Windows

XP SP2 and Windows Vista™ users, see Firewall settings in the

Software User’s Guide on the CD-ROM.

For Windows

XP SP1 user’s, please visit the Brother Solutions Center.

Your computer cannot find your

machine.

<Windows

users>

Firewall settings on you PC may be rejecting the necessary network connection.

(For details, see the suggestion above for ‘The network scanning feature does not

work.’)

<Macintosh

users>

Re-select your machine in the Device Selector application located in Macintosh

HD/Library/Printers/Brother/Utilities/DeviceSelector or from the model of

ControlCenter2.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 123 124

Comments to this Manuals

No comments

Brother DCP-350C User Manual Page 82

Comments to this Manuals

Related products and manuals for Printers Brother DCP-350C