Brother DCP-350C User Manual download pdf (Page 97)

Troubleshooting and Routine Maintenance

83

B

Packing and shipping

the machine

B

When you transport the machine, use the

packing materials that came with your

machine. If you do not pack the machine

properly, you could void your warranty.

CAUTION

It is important to allow the machine to ‘park’

the print head after a print job. Listen

carefully to the machine before unplugging

it to make sure that all mechanical noise

has stopped. Not allowing the machine to

finish this parking process may lead to print

problems and possible damage to the print

head.

a Open the ink cartridge cover.

b Pull the lock release levers down and

take out all the ink cartridges.

(See Replacing the ink

cartridges on page 74.)

c Install the yellow protective part, lift each

lock release lever and push it until it

clicks, and then close the ink cartridge

cover.

CAUTION

If you are not able to find the yellow

protective part, DO NOT remove the ink

cartridges before shipping. It is essential

that the machine be shipped with either the

yellow protective part or the ink cartridges

in position. Shipping without them will

cause damage to your machine and may

void your warranty.

d Unplug the machine from the AC power

outlet.

e Using both hands, use the plastic tabs

on both sides of the machine to lift the

scanner cover until it locks securely into

the open position. Then unplug the

interface cable from the machine, if it is

connected.

f Lift the scanner cover to release the lock

(1). Gently push the scanner cover

support down (2) and close the scanner

cover (3).

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 123 124

Comments to this Manuals

No comments