Brother DCP 8060 User Manual download pdf (Page 12)

1. Printing

Printer operation key 1

Job Cancel 1

To cancel the current print job, press Job Cancel. If the status LED turns Yellow, you can clear the data that

is left in the printer memory by pressing Job Cancel.

Secure Key 1

Secured data is password protected. Only those people that know the password will be able to print the

secured data. The machine will not print secure data until the password is entered. After the document is

printed, the data will be cleared from the memory. To use this function, you need to set your password in the

printer driver dialog box. (See Secure Print on page 25.)

Note

The password is a 4 digit number.

a Press Secure.

Note

The LCD displays No Data! if there is no secured data in the memory.

b Press a or b to choose the user name.

Press OK. The LCD displays job selections.

c Press a or b to choose the job.

Press OK. The LCD prompts you to enter your four-digit password.

d Enter your password using the control panel.

Press OK.

e To print the data, press a or b to choose Print.

Press OK.

The machine prints the data.

To delete the secured data, press a or b to choose Delete.

Press OK.

f Press Stop/Exit.

Note

• If you turn the power switch Off, the secured data saved in memory will be cleared.

• After you print the secured data it will be cleared from memory.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 181 182

No comments

Brother DCP 8060 User Manual Page 12