Brother DCP 8060 User Manual download pdf (Page 174)

10. Network Scanning (Not available for DCP-8060)

168

Scan to File 10

When you choose Scan to File, you can scan a black and white or colour document and send it directly to a

Macintosh

you designate on your network. The file will be saved in the folder and file format that you have

configured in ControlCenter2 on the designated Macintosh

. You can change the Scan configuration. (See

File on page 151.)

a Put the document face up in the ADF, or face down on the scanner glass.

b Press (Scan).

c Press a or b to choose Scan to File.

Press OK.

If your machine is a MFC-8460N, go to Step e.

If your machine is a MFC-8860DN, MFC-8870DW or DCP-8065DN, go to Step d.

d Press a or b to choose 2sided (L)edge, 2sided (S)edge or 1sided.

Press OK.

Note

If you want to scan a document using the duplex scanning feature, you need to put the document in the

ADF and then choose 2sided (L) edge or 2sided (S) edge depending on your document layout.

e Press a or b to choose the destination Macintosh

you want to send to.

Press OK.

If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination

Macintosh

on the control panel.

Press OK.

The machine will start the scanning process.

Note

If you would like to display the folder window after scanning the document, select Show Folder on the

Device Buttons tab of the ControlCenter2 configuration. (See SCAN on page 147.)

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 180 181 182

No comments

Brother DCP 8060 User Manual Page 174