Brother HL 1270N User Manual download pdf (Page 76)

6-15

• Where nlm is the name of the PSERVER NLM on your file server

• Number is the printer number (must match the printer number you selected during

the PCONSOLE configuration in the previous steps)

• Service is the name of the service assigned by Netware print server name(where the

default services are BRN_xxxxxx_P1 for the Brother printer, where "xxxxxx is the

last six digits of the Ethernet address (MAC address)).

For example, to set up remote “Printer 3” for an Brother printer with the print server

BRN_310107_P1 using the PSERVER NLM called BROTHER1PS, you would type:

SET NETWARE NPRINTER BROTHER1PS 3 ON BRN_310107_P1

SET NETWARE RESCAN

EXIT

• You can also enter the remote printer name using your web browser by connecting

to the Brother print server using the TCP/IP protocol and selecting the Netware

protocol configuration.

✒

Note

The same services

assigned by Netware print server name

cannot be used for both queue

server mode and remote printer mode.

You must now unload the PSERVER NLM from your NetWare file server console and

then reload it in order for the changes to take effect.

Testing the Prin

t Queue

You can test the queue by using the NetWare DOS nprint command:

C:> nprint c:\autoexec.bat q=queuename

where queuename

is one of the print queues you created earlier in this chapter. The file will be

spooled to the print server for printing and should print on the printer within a short period of

time. If it does not, double check your configuration, and if necessary, refer to

Troubleshooting information.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 121 122

No comments

Brother HL 1270N User Manual Page 76