Brother COMPACT OVERLOCK MACHINE Instruction Manual download pdf (Page 21)

Stitch Length

To change the stitch length,

(1) Locate the stitch length adjustment dial on the

left side of the machine.

(2) Turn the stitch length adjustment dial forward

to lengthen the stitch to a maximum of 4 mm

(5/32 inch).

Turn the stitch length adjustment dial backwards

to shorten the stitch length to a minimum of 2 mm

(1/8 inch).

(3) The normal stitch length setting is 2.5 mm to

3 mm.

Stitch Width

Two-needle models

To change the stitch width.

(1)Move the stitch width lever (located on the left side

of the machine toward the front) up to reduce the

stitch width or down to increase the width.

The stitch width can be set between R4.5 mm

(11/64 inch) and 7 mm (9/32 inch).

The normal stitch width setting for regular overlock

stitch is 5mm (13/64 inch).

One-needle models

• The width is factory set to 3.5mm (9/64 inch).

A Two-needle models

B One-needle models

1 Stitch width lever

2 Regular needle plate

3.5

针迹长度

若要更改针迹长度

(1) 请旋转机身左侧的针迹长度调整转盘。

(2) 向前转动针迹长度调整转盘可将针迹增长到最大

4 毫米（5/32 英寸）。

向后转动针迹长度调整转盘可将针迹长度最小缩

短到2毫米（1/8 英寸）。

(3) 正常的针迹长度为 2.5 毫米到 3 毫米。

针迹宽度

双针型号

若要更改针迹宽度

(1)请移动针迹宽度控制杆（位于缝纫机左前侧）：

向上可减小针迹宽度，向下可增大针迹宽度。

针迹宽度可设定在 R4.5 毫米（11/64 英寸）到

7 毫米（9/32 英寸）之间。

普通包缝针迹的正常针迹宽度为 5 毫米（13/64 英

寸）。

单针型号

• 针迹宽度的出厂设置为 3.5 毫米（9/64 英寸）。

A 双针型号

B 单针型号

1 针迹宽度控制杆

2 普通针板

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 71 72

Comments to this Manuals

No comments

Brother COMPACT OVERLOCK MACHINE Instruction Manual Page 21

Comments to this Manuals

Related products and manuals for Sewing machines Brother COMPACT OVERLOCK MACHINE