Brother PE 300S User Manual download pdf (Page 39)

Contents Setting Up

Basic Sewing

Machine

Operation

Utility Stitches Embroidering

Maintenance

Troubleshooting

Error

Messages

Sewing Chart

Patterns

(Programmed

in Machine)

Patterns

(Memory Card)

STRAIGHT STITCHES

1 Straight (Left)

2 Straight (Middle)

UTILITY STITCHES

1. Attach the J foot. Handle thread and fabric with your left hand

while turning the balance wheel with the right. Pierce the nee-

dle through the fabric as shown.

4. Raise the presser foot, remove the fabric and cut the thread.

2. Lower the presser foot. While pressing the reverse stitch but-

ton, sew 3-4 stitches in reverse to make a reinforcement stitch.

Then release the “REVERSE STITCH” button and press the

“START/STOP” button to begin sewing.

1 Reinforcement stitch (3-4 stitches)

3. At the end of a seam, press the “REVERSE STITCH” button

again to sew another reinforcement stitch.

* Reverse stitches are sewn while the “REVERSE STITCH”

button is pressed.

* Sewing in reverse is carried out at a slow sewing speed.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 110 111

No comments

Brother PE 300S User Manual Page 39