Brother PE 300S User Manual Page 65

  • Download
  • Add to my manuals
  • Print
  • Page
    / 111
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 64
62
Contents Setting Up
Basic Sewing
Machine
Operation
Utility Stitches Embroidering
Maintenance
Troubleshooting
Error
Messages
Sewing Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory Card)
BEFORE YOU BEGIN
EMBROIDERING
J
1. Raise needle with the up-needle button. Turn power off.
2. Loosen the screw on the foot holder and remove foot holder.
3. Attach the embroidery foot. Screw back on tightly.
1 Screw
* Make sure the needle clamp screw is also tightened.
1. Embroidery unit and memory cards (optional).
CAUTION
Do not touch the embroidery unit connectors. Doing so could cause damage to the machine.
Do not move the sewing machine while the embroidery unit is attached.
The embroidery unit could fall and cause injury.
Do not carry embroidery unit by the carriage or apply excessive
force to it, or you could cause damage.
Keep hands and other items away from the embroidery unit
carriage and embroidery hoop while they are in motion. Injury
could result.
1 Hoop holder
2 Carriage
3 Connector
Always store memory cards in the accessory case.
Always turn machine off before removing the embroidery unit or memory cards.
Please note that the small embroidery hoop (optional) will not work with certain pattern sizes and
sewing positions.
Please note that memory cards will not work with certain pattern sizes, and some memory cards are
not compatible with this machine.
2. Attaching the embroidery foot “Q”
CAUTION
Always make sure the power is off before changing feet.
Injury could result if the “START/STOP” button is accidentally pushed and the machine starts
running during this operation.
Do not use the embroidery foot “Q” for anything other than embroidery.
1
2
3
1
Page view 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 110 111

Comments to this Manuals

No comments