Brother Z-8550A Service Manual Page 118

  • Download
  • Add to my manuals
  • Print
  • Page
    / 128
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 117
Z-8550A, 8560A
14. TROUBLESHOOTING
109
14. TROUBLESHOOTING
Please check the following points before calling for repairs or service.
If the following remedies do not fix the problem, turn off the power switch and consult a qualified technician or the place of
purchase.
DANGER
Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet
before opening the face plate of the control box. Touching areas where high voltages are present can result in
severe injury.
CAUTION
Turn off the power switch and disconnect the power cord before carrying out troubleshooting.
The machine may operate if the treadle is depressed by mistake, which could result in injury.
Problem Possible cause Page
1 Upper thread is not tight.
Is the upper thread tension too weak, or is the lower thread tension
too strong?
Adjust the upper thread tension or lower thread tension.
Was the thread threaded through the thread guide of the bobbin
case in accordance with the type and thickness of the sewing
article’s material.
Use thread guide A or B in
accordance with the material being
sewn.
Instruction
manual
Instruction
manual
2 Lower thread is not tight.
Is the lower thread tension too weak, or is the upper thread tension
too strong?
Adjust the lower thread tension or upper thread tension.
Was the thread threaded through the thread guide of the bobbin
case in accordance with the type and thickness of the sewing
article’s material.
Use thread guide A or B in
accordance with the material being
sewn.
Instruction
manual
Instruction
manual
0573M
0574M
3556M
3556M
Page view 117
1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 127 128

Comments to this Manuals

No comments