Brother Z-8550A Service Manual download pdf (Page 12)

Z-8550A, 8560A

3. FUNCTION SETTINGS

3-1. Setting memory switches

• If the icon (1) on the LOCK key is on, release the lock before carrying out the

following operations.

• If the icon (2) on the MAX key is on, press the MAX key to return the main display

to the stitch number display (orange).

• The main display will change to green and memory switch

setting mode will be enabled.

• Select the memory switch number for the value to be

changed while referring to the “List of memory switch

settings”.

• Change the number within the setting range while referring to

“List of memory switch settings”.

• The buzzer will sound for approximately 1 second, and the

setting value will be accepted.

• The main display will return to the stitch number display

(orange).

(Press for 2 seconds or more.)

NOTE:

• If the treadle is depressed before the ENTER key is pressed, the main display will return to an orange display and the

setting value will not be changed.

• If the memory switch number is changed after the setting value has been changed but before the ENTER key is

pressed, the setting value will not be changed.

Press the ENTER key for each memory switch number to accept the setting values.

Memory switch No. selection

Changing the setting value

2238M

2240M

2241M

2242M

2239M

Memory switch No. setting value

Example:

Setting value

“1”

Example:

Memory switch

No. 14

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 127 128

No comments

Brother Z-8550A Service Manual Page 12