Brother HL-2150N User Manual download pdf (Page 87)

Troubleshooting

Error messages in the Status Monitor 6

The Status Monitor will report problems with the printer. Take the proper action by referring to the following

table.

If you want to turn the status monitor on, follow these steps:

For Windows

users

Click the Start button, All Programs

, your printer (e.g Brother HL-2140), and then Status Monitor.

Programs for Windows

2000 users

For Macintosh

users (Mac OS

X 10.3 or greater only)

See Status Monitor (For Mac OS

X 10.3 or greater users) on page 44.

Error message Action

Cover is Open  Close the front cover of the printer.

Memory Full  Press the Go button to print the remaining data in the printer memory. Cancel the

print job if you want to delete the remaining data in the printer memory. See Go

button on page 55.

 Reduce the complexity of your document or cut the print resolution.

Print Overrun  Press the Go button to print the remaining data in the printer memory. Cancel the

print job if you want to delete the remaining data in the printer memory. See Go

button on page 55.

 If this does not clear the error, reduce the complexity of your document or cut the

print resolution.

 (HL-2150N / HL-2170W only)

Change the following settings in the supplied Windows

driver and try again. The

best combination of these settings will vary depending on your document:

• Graphics mode

• TrueType mode

• Use Printer TrueType

Fonts

Choose the Advanced tab, click the Print Quality icon, and then choose Manual in Print Setting

and click the Setting... button.

No Paper Fed Tray 1  The paper tray may be out of paper or not properly installed. If it is empty, put a

new stack of paper in the paper tray and then press the Go button.

 If there is paper in the paper tray, make sure it is straight. If the paper is curled,

straighten it before printing. Sometimes it is helpful to remove the paper, turn the

stack over and put it back in the paper tray.

 Cut the amount of paper in the paper tray, and then try again.

 Make sure you use paper that meets Brother’s recommended paper

specifications. See About paper on page 5.

 Load the same size paper that you selected in the current driver setting.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 129 130

Comments to this Manuals

No comments

Brother HL-2150N User Manual Page 87

Comments to this Manuals

Related products and manuals for Hardware Brother HL-2150N