Brother QL QL-500 User's Guide

FRANÇAISDEUTSCHNEDERLANDSSTEP1STEP2Getting startedMaintenance and TroubleshootingIntroductionQL-500 / QL-560Be sure to read and understand this guide

Getting started8Getting startedDo not connect the QL-500/560 to your personal computer until directed to do so when installing the printer driver.Use

9STEP1STEP2Getting startedMaintenance and TroubleshootingIntroductionThe LED lamp on the QL-500/560 indicates the current operating condition.Lamp Con

Getting started10Your QL-500/560 comes with a paper guide that collects strips of printed labels that have not been cut off from the machine. Attach t

11STEP1STEP2Getting started IntroductionMaintenance and TroubleshootingMaintenance and Troublesho otingMaintenance of the printer needs only to be don

Maintenance and Troubleshooting12When glue is attached to the label outlet (metallic plate part and resin guide part) and the printer damages the labe

13STEP1STEP2Getting started IntroductionMaintenance and TroubleshootingEventually the cutting blade on the cutter unit will become dull (blunt) and ne

Maintenance and Troubleshooting146Grip the tab and lift out the cutter unit.Take care not to touch the blade of the cutter.7Set the new cutter unit in

15STEP1STEP2Getting started IntroductionMaintenance and TroubleshootingIf problems occur while using this printer, the following may help you to solve

Maintenance and Troubleshooting16Items SpecificationsDisplay LED lamp (green)PrintPrinting methodDirect thermal printing via thermal headSpeed of prin

Printed in ChinaLB8732001

Thank you for purchasing the QL-500/560.This guide briefly describes the steps to start using your QL-500/560.Refer to the Software User's Guide

1STEP1STEP2IntroductionGetting startedMaintenance and TroubleshootingIntroduction •••••••••••••••••••••••••••••••••••••••••••••••••••• 2General Infoma

Introduction2Introducti onCompilation and Publication NoticeUnder the supervision of Brother Industries Ltd., this manual has been compiled and publi

3STEP1STEP2IntroductionGetting startedMaintenance and TroubleshootingRead all of these instructions and save them for later reference. Follow all warn

Introduction4Follow these guidelines to avoid fire, electric shock, or other damage.Power Cord Use only the authorized power source (220 - 240 V AC)

5STEP1STEP2IntroductionGetting startedMaintenance and TroubleshootingThe Printer• Never disassemble the printer or allow it to get wet to avoid possi

Introduction6• If the machine jams due to a build up of adhesive, you should clean the surface of the paper guide. Unplug the printer from the power a

7STEP1STEP2IntroductionGetting startedMaintenance and TroubleshootingCD-ROM and Software• Do not scratch or subject the CD-ROM to high or low tempera