Brother QL QL-500 User's Guide download pdf (Page 15)

STEP

Getting started IntroductionMaintenance and

Troubleshooting

Eventually the cutting blade on the cutter unit will become dull (blunt) and need to be

replaced. At the appropriate time, purchase a new replacement cutter unit and install it

according to the following procedure.

Check that the cutter unit is located in the home position.

Turn OFF the power to the printer and pull out the power cord from

the wall socket.

Open the DK Roll cover and pull the roll

release lever to the up position. Remove the

DK Roll.

Lift up the cutter cover.

Using a cross-head screwdriver, loosen the

screw which holds the cutter blade unit in-

place.

The screw securing the cutter unit should not be

completely removed. Simply loosen it to remove

the cutter unit from the printer.

Replacing the cutter unit

1 2 ... 10 11 12 13 14 15 16 17 18 19

No comments

Brother QL QL-500 User's Guide Page 15