Brother DCP-J140W User Manual

1Using the documentation1Please read this booklet before attempting to operate the machine, or before attempting any maintenance. Failure to follow th

10Important• Disruption of power can wipe out information in the machine's memory.• DO NOT put objects on top of the machine.• If the machine doe

11Regulation 1WARNING This product must be installed near an AC power outlet that is easily accessible. In case of an emergency, you must unplug the p

12Important• Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user’s authority to operate the equipment.• A

13Trademarks 1The Brother logo is a registered trademark of Brother Industries, Ltd.Windows Vista is either a registered trademark or trademark of Mic

14Copyright and License 1©2012 Brother Industries, Ltd. All rights reserved.This product includes software developed by the following vendors:©1983-19

2Compilation and Publication 1Under the supervision of Brother Industries, Ltd., this manual has been compiled and published, covering the latest prod

3 DO NOT place the machine near chemicals or in a place where chemicals could be spilled on it. Should chemicals come into contact with the machine,

4Important• DO NOT place your product next to devices that contain magnets or generate magnetic fields. Doing so may interfere with the operation of t

5To use the machine safely 1WARNING ELECTRICAL HAZARDSFailure to follow the warnings in this section may create the risk of an electrical shock. In

6 If water, other liquids, or metal objects get inside the machine, immediately unplug the machine from the AC power outlet and contact Brother Autho

7 For users with pacemakersThis machine generates a weak magnetic field. If you feel anything wrong with the operation of your pacemakers when near th

8 DO NOT put your hands on the edge of the machine. Doing this may cause injury to your fingers by pinching them.

9 DO NOT touch the area shaded in the illustration. Doing this may cause injury to your fingers by cutting them on the edge of the machine. DO NOT c