Brother MFC-820CW User Manual download pdf (Page 87)

Wireless installation for Windows

8 - 16

Read the Important Notice.

For MFC-640CW:Press Menu/Set, 5, 6 on the

control panel, and then press ▲ or ▼ to choose

Wired LAN. Press Menu/Set. If Reboot OK? is

displayed, press 1.Yes. The wireless network

interface will become inactive with this setting. The

machine will restart automatically. After it restarts,

check the box on the screen and click Next.

For MFC-820CW: Press Menu on the control panel.

Press

▲ or ▼ for LAN and press OK. Press ▲ or ▼ for

Network I/F and press OK. Press ▲ or ▼ for

Wired LAN and press OK. If Reboot OK? is displayed, press 1 for Yes. The wireless network interface

will become inactive with this setting. The machine will restart automatically. After it restarts, check the

box on the screen and click Next.

If Accepted is displayed, press Stop/Exit. Check the box and click Next.

Note

It will take approximately one minute for the LAN menu on the LCD to become available after the machine

restarts or is turned on.

For configuration, you must temporarily connect

your Brother wireless device directly to a free port on

your access point, hub or router using a network

cable.

When the following screen appears, open the

scanner cover to its open position. Insert the network

cable to the access point and then to the machine.

You will find the LAN socket above and to the left of

the ink cartridge slots, as shown. Click Next and go

to step 12.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 163 164

No comments

Brother MFC-820CW User Manual Page 87