Brother MFC-9010CN User's Guide download pdf (Page 108)

96

Resetting the drum counter C

When you replace a drum unit with a new

one, you need to reset the drum counter by

completing the following steps:

a Plug the machine’s power cord back into

the AC power outlet first, and reconnect

all cables. Turn on the machine’s power

switch.

b Press Menu, 5, 6.

c Press a or b to choose the color of the

drum you replaced.

Press OK.

d Press 1 to reset the drum unit counter.

e Press Stop/Exit.

Replacing the belt unit C

Order No. BU-200CL

A new belt unit can print approximately

50,000 A4 or Letter size single-sided pages.

Belt End Soon message C

Belt End Soon

If the LCD shows Belt End Soon, it means

the belt unit is near the end of its life. Buy a

new belt unit and have it ready before you get

a Replace Belt message.

Replace Belt message C

When the following message appears on the

LCD, you need to replace the belt unit:

Replace Belt

IMPORTANT

• DO NOT touch the surface of the belt unit.

If you touch it, it could degrade print

quality.

• Damage caused by incorrect handling of

the belt unit may void your warranty.

a Turn off the machine’s power switch.

Unplug the power cord from the AC

power outlet.

b Fully open the top cover by lifting up on

the handle (1).

IMPORTANT

When the scanner is open, you cannot

open the top cover.

1

1 ... 107 108 109 ... 148

Comments to this Manuals

No comments